City of Wilmington - Project Tracking

---

---

---

 No further comments.

---

---

---

---

DISCOUNT TIRE NCC39 [TRC Plan Review #2] TECHNICAL STANDARDS – ACCESS (driveway, sidewalk, and sight distance): 1. Driveways shall be City-standard ramp-type driveways. [SD 3-03.3 & 3-03.4 (Vertical curb) CofWTSSM]. Show these details on the drawings. 2. Dimension driveway flares. TECHNICAL STANDARDS – PARKING: 3. 4” is the typical height of wheel stops provided within the parking facility. Please revise the wheel stop details on sheet D-1. [Page 7-20 of CofWTSSM] TECHNICAL STANDARDS – Barrier Free Design: 4. Detectable warning domes must be installed at the end of each sidewalk before entering drive aisle/pavement surface. It provide a distinctive texture intended to alert persons to the approach to vehicular areas [City/ADA standards]. This is applicable for the accessible aisle also regardless of ramp. 5. Please remove the single post detail for the handicap sign shown on sheet D-4. It is not as per MUTCD/City standards. 6. Wheelchair ramps shall be constructed at the corner of Market St and Gingerwood Dr abutting this development. Please show the graphics. Please let me know if you have any questions or if I can be of further assistance as this development moves through the review process.

---

---

---

---

I'm not sure if I missed it, but I did not see the type of Building Construction according to the International Building Code  on the plans. (Preferably the site data table) If I overlooked this, please contact me Chris Walker at 343-3918 or email at chris.walker@wilmingtonnc.gov 

---

---

---

---

---

---

---

---

Engineering has reviewed the plans for the Discount Tire project submitted May 22, 2019 and have the following attached comments.

---